The Speed Signal Amplifier and Divider Module is a functional yet reliable device.
This device is ideal for all installations, where it is necessary to adapt the vehicle’s speed signal to the trip meter’s requirements. The module can be used with any trip meter from any manufacturer or any other device utilizing a speed signal.
For installation, electronic knowledge and an oscilloscope are recommended, as it is the only tool to visualize the amplitude and frequency of the speed signal.
The Speed Signal Amplifier and Divider Module will help solve problems with:
- incorrect signal amplitude,
- incorrect number of pulses,
- incorrect PNP/NPN output type.
Many vehicles use speed sensors with non-standard signal levels, which means a trip meter cannot always handle precise measurement.
In this case, a speed signal amplifier and divider module is essential. By purchasing the module, you receive a device that:
- amplifies the speed signal amplitude,
- divides the number of pulses,
- converts the signal via NPN, PNP inputs,
- improves signal quality.
Advantages of the Speed Signal Amplifier and Divider Module
- The module has a built-in speed signal input with adjustable gain. There is also an input for a signal with a fixed switching level.
- The built-in divider allows adjusting the number of pulses to the trip meter’s capabilities.
- During adjustment, the module does not require you to use a soldering iron, as gain adjustment and division matching are done by moving jumpers.
- The module is equipped with an innovative system for pulse counting signaling and power control.
The Speed Signal Amplifier and Divider Module detects signals from:
- ABS sensors,
- gearbox sensors,
- axle sensors.
During device operation, please note that the casing is not hermetic; therefore, any significant dirt or moisture may affect the device’s performance.
Features
- speed signal pulse division
- speed signal amplitude amplification
- converting signals to NPN or PNP outputs
Technical specifications
- Supply Voltage – 5V or 7 ÷ 30V
- Current Consumption – 10mA + output current
- Height – 31 mm
- Width – 61 mm
- Depth – 13 mm
- Weight – 50 g
