The H-51 Trip Meter is an ideal trip meter for simple measurements in car, motorcycle, or quad rallies held in the toughest conditions. It ensures clear presentation of displayed values, simple operation, and measurement precision within a compact housing.
It is extremely durable and ensures clear presentation of displayed values, simple operation, and measurement precision.
The H-51 is an indispensable trip meter with basic functions.
The H-51 features and allows for:
- two trip counters with independent reset capability
- the ability to adjust the distance using buttons or an external remote control
- the ability to enter any long distance value (ODO)
- the height of the main parameter digits is 20 mm
- measures voltage
- indicates vehicle speed
- indicates course (direction of travel)
- clock synchronization function with GPS time*
The H-51 can be expanded with
- a built-in GPS module
- waypoint routing functions
Distance measurement is performed
- via the built-in GPS module*
- via two sensors of any design
- sensors can operate in various configurations: sum, left wheel, right wheel
- in the GPS version, measurements can be performed by combining information from sensors and GPS
If you are looking for a robust trip meter with a durable housing, a clear display, compact dimensions, and immense functionality, then the H-51 is for you.
Additional Functions
- you can count distance “forward” or “countdown”
- in the GPS version, you can switch to GPS counting with a single press (e.g., in case of sensor loss/failure)
- in the GPS version, you can purchase the waypoint routing function and Garmin compatibility
- in the GPS version, you can see your current course
Optional Accessories
You can connect to the iTrip H-51:
- a driver’s display which can show any measured parameter
- any type of single or 3-button reset buttons
- additional function switches to speed up operation
If you participate in off-road rallies, pay attention to the hermetic sealing of accessories.
The H-51 is an ideal trip meter for off-road rallies, motorcycles and quads, Baja and cross-country rallies for motorcycles, quads, and SSVs.
The trip meter precisely measures distance and is easy to operate. It can be expanded with accessories and function switches.
Off-road:
> simultaneously displays all parameters, which simplifies operation
> can be equipped with waypoint routing and Garmin compatibility
*asterisk indicates a feature or capability for the GPS version.
Features and Detailed Information.
Precise measurements from speed sensors
The iTrip metrometer allows connection of 2 speed sensors of any type. The sensor signal can be used in 3 ways:
- works one input with one way sensor
- works one input with one way sensor, a backup sensor is connected to the second input to make a change in case of failure
- two inputs with two sensors work simultaneously. The metrometer takes simultaneous measurements from two sensors mounted on the right and left sides of the vehicle.
Quick long ODO correction for off-road rally computers
The rally computer features a useful long ODO distance correction function. Should the measured distance not align with the distance provided by the organizer, you can perform a quick correction using the arrow buttons. Each press adjusts the correction value by 10 m.
Holding down the button will repeat the correction.
Alternatively, you can perform a full long ODO distance correction by manually entering the value into the rally computer.
