The Classic Trip Meter is a precise and easy-to-use device designed for distance measurements during rally navigation. It is a highly accurate and reliable trip meter that will allow you to follow the roadbook.
It offers a clear display of measured values and simple operation. It is the ideal trip meter for any type of rally.

The Classic is a simple trip meter for both amateurs and professionals.

iTrip Classic Trip Meter Features:

• two trip counters with independent reset capability
• Ability to correct distance using toggle switches
• Main parameter digit height 15 mm
• Calibration saved in format: 1 sensor pulse = 0.00000 m. Recommended for a low number of pulses per wheel revolution.
• Independent calibration of sensors and GPS

Distance Measurement Functions:

Distance measurement is performed:

• via the built-in GPS module*
• via two sensors of any design

The trip meter meets all expectations of a rally navigator:
– enables driving according to the roadbook issued by the organizer
– allows for distance corrections in case of discrepancies with the roadbook or getting lost
– continuously tracks vehicle speed and car power supply voltage

Navigation Functions:

• You can measure distance forward and count down backward
• You can stop distance accumulation
• You can correct the distance (add/subtract) by 10m with each button toggle
• You can manually set any ODO/TOTAL distance value

GPS-related Functions:

• In the GPS version, you can measure distance without wheel sensors
• In the GPS version, you can still calibrate the trip meter to match the organizer’s distance

Additional Accessories:

You can connect the following to iTrip Classic:

• Any type of reset button for clearing trip distance

Regularity Rallies.

The iTrip Classic is a trip meter with high precision and simple operation. It is ideally suited for the traditional class or for a beginner navigator. It does not have a built-in speed table or support for competitive regularity driving. It is suitable for regularity rallies, even where electronic crew support is prohibited.

How does the Classic Trip Meter help the crew?

The iTrip Classic performs the difficult and tedious work for the navigator. The trip meter is always available; it can display measured values at any time or guide the crew to their destination. It does this quickly and accurately. The crew adds intelligence and driving strategy to influence the course of the competition to their advantage.

*The asterisk denotes a feature or capability for the GPS version.

Maximum Operating Precision

The trip meter is manufactured using the latest technology. It features:

• Super-fast processor from a renowned manufacturer
• Internal electronics are assembled by an automated production line
• Built-in GPS (uBlox) updates once per second
• The trip meter has a calibration method effective even with a low number of pulses per wheel revolution.

The iTrip Classic Trip Meter is an easy-to-use device

• Features 6 clearly marked and backlit buttons
• Features two tiltable toggle switches
• Features a clear LED display, ensuring excellent visibility of measured parameter values
• Features a simple calibration method
• An operating manual containing a description of each function and button

Who is this trip meter for?

The iTrip Classic is a trip meter for every crew and every rally navigator. Amateurs will benefit from its simple functions and ease of use. Professionals will extract every possible advantage from the trip meter’s capabilities to gain seconds and fractions of seconds over other crews.

• Distance measurement with 10m resolution
• Maximum distance readings:
  • TRIP (PARTIAL) 99.99 km
  • ODO (TOTAL) 999.9 km
• Resetting TRIP (PARTIAL) and ODO (TOTAL) distances
• ODO (TOTAL) distance correction – quick via toggle switches and full by entering the distance
• Settings retention in non-volatile memory

Displayed parameters with option to disable

• Total distance ODO (TOTAL)
• Segment distance TRIP (PARTIAL)
• Speed in km/h
• Vehicle supply voltage

Kit includes

• Main unit, trip meter
• Wiring harness for power and sensor connection
• In the GPS module version – GPS antenna

Trip meter designed for:

Speed rallies – measuring short distances between points and long distances from the start of a stage or section. The choice remains with the navigator.

Regularity rallies – it is an ideal solution for classic car rallies where devices with built-in speed tables are not allowed. The Classic Trip Meter does not calculate or check average speed, which complies with the regulations for this type of rally.

Design

Physical features of the trip meter:

• Plastic casing
• LCD displays with 14 mm digit height
• Internal GPS module
• Any type of reset button

Support, dimensions, drawings, diagrams

See the manual on the support page:
https://wiki.itripcomputer.com/pl/metromierze/classic/